Autocue-Hilfezentrum

[en] Warning Risk of fire or electric shock. Dangerously high voltages are present inside the unit. - Do not expose the monitor and its components to rain, water, or excessively humid environments. - Do not disassemble the unit. - Refer servicing to qualified personnel only. - Connect the AC power properly and verify if all wiring is properly connected.

[en] Warning This equipment is not intended for use in critical applications where its failure to operate would create immediate life threatening circumstances. Applications including, but not limited to, nuclear reactor control, aerospace navigation systems and life support systems are not appropriate for this product.

[en] Caution This product has been adjusted specifically for use in the region to which it was originally shipped. If operated outside this region, the product may not perform as stated in the specifications.

[en] Caution Please keep the monitor out of direct sunlight, very bright lights and away from any heat source. Lengthy exposure to this type of environment may result in discoloration and damage to the monitor.

[en] Caution Obstruction of the ventilation holes prevents proper cooling of the monitor’s electronics and may result in overheating. Remove any object that could fall into the ventilation holes.

[en] Caution Using an unapproved power cord may lead to overheating. Please use the approved cord provided by Autocue at all times. If your power cord is missing, please contact your local Videndum Production Solutions Office.

[en] Caution When the monitor is cold and brought into a room or the room temperature goes up quickly, condensation may occur on the interior and exterior surfaces of the monitor. In that case, do not turn the monitor on. Instead wait until the condensation disappears, otherwise it may cause short circuit or damage to the monitor.

[en] Caution Only use authorized accessories manufactured or recommended by Autocue with this product. Using unapproved accessories may damage the monitor and will void the warranty.

[en] This product may not be covered by warranty for uses other than those described in this manual.

[en] If the monitor continuously displays a static image, dark smudges or burn-in may appear. To maximize the life of the monitor, we recommend the monitor be turned off periodically or use of a moving screen saver. Failure to activate a screen saver, or a periodic screen refresh application may result in severe “burn-in” or “after-image” or “ghost image” symptoms that will not disappear and cannot be repaired. The damage mentioned above is not covered by the warranty.

[en] The backlight of the LCD panel has a fixed lifetime. Depending on the usage pattern, such as continuous usage for long periods, the lifespan of the backlight may run out sooner, requiring replacement.

[en] Caution Repairs from a person besides an engineer or partner of Videndum Production Solutions Ltd. will nullify any warranty claim. Modifying or opening the product by the customer may result in damage to the monitor and will nullify any warranty claim.

[en] Caution Do not store or use the monitor in locations exposed to extreme heat, direct sunlight or extreme cold. In order to maintain the best performance of your monitor, prevent damage and maximize its lifetime, please use the monitor in a location that falls within the recommended temperature and humidity ranges.

[en] Operating temperature: -20c° to +60c°

[en] Storage temperature: -20c° to +70c°

[en] Humidity level: 20% - 90% non-condensing

[en] Do not press on the LCD panel or edge of the frame, as this may result in display malfunctions, such as interference patterns, etc. If pressure is continuously applied to the LCD panel surface, the liquid crystal may deteriorate or the LCD panel may be damaged.

[en] Do not scratch or press the LCD panel with any sharp objects, at this may result in damage to the LCD panel. Do not attempt to brush with tissues as this may scratch the panel

[en] Stains on the case and LCD panel surface can be removed by moistening part of a soft cloth with water or by using a screen cleaner (available as an option). Chemicals such as alcohol and antiseptic solution may cause gloss variation, tarnishing, and fading of the case or LCD panel, and also quality deterioration of the image. Never use thinner, benzine, wax, or abrasive cleaner as they may damage the enclosure or LCD panel surface

Aktivieren Sie immer einen bewegten Bildschirmschoner, wenn Sie Ihren Monitor unbeaufsichtigt lassen. Aktivieren Sie immer eine Anwendung zur regelmäßigen Bildschirmaktualisierung, wenn Ihr Monitor unveränderliche statische Inhalte anzeigt. Die ununterbrochene Anzeige von Standbildern oder Standbildern über einen längeren Zeitraum kann zu „Einbrennen“, auch bekannt als „Nachbilder“ oder „Geisterbilder“, auf Ihrem Bildschirm führen. „Burn-in“, „After-Imaging“ oder „Ghost Imaging“ ist ein bekanntes Phänomen in der LCD-Panel-Technologie. In den meisten Fällen verschwinden die „eingebrannten“ oder „Nachbilder“ oder „Geisterbilder“ allmählich nach dem Abschalten der Stromversorgung

[en] Warning Failure to activate a screen saver, or a periodic screen refresh application may result in severe “burn-in” or “after-image” or “ghost image” symptoms that will not disappear and cannot be repaired. The damage mentioned above is not covered by the warranty. Consult a service technician if the monitor does not operate normally, or you are not sure what procedure to take when the operating instructions given in this manual have been followed